Featured Products
4 in 1 Multi Gas Analyzer AS8900
A smart Sensor gas detector AS-8900 is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect the following gases
- Oxygen Gas Monitor - O2 Gas Detector
- Carbon Monoxide Gas Monitor - CO Gas Detector
- Hydrogen Sulfide Gas Monitor - H2S Gas Detector
- Combustible Gas Monitor - LEL Gas Detector
ANENG ST212 Smart Digital Clamp Meter
It can measure AC and DC voltage, AC/DC current, resistance and test continuity.
Automatically select the measurement function and range.
Overload protection for the entire measuring range.
LCD color display with backlight, easy to operate and read.
Data retention function, low battery indicator, automatic shutdown.
Suitable for testing and maintenance of electrical equipment.
ELEJOY EY-1600W PV/ Solar Power Meter
This solar panel multimeter can test the maximum power point and open circuit voltage of a photovoltaic panel. The photovoltaic panel power supplies method is more energy-saving and does not require additional electricity. If you are looking for this product, come and have a try, it will not let you down.
ELEJOY EY-800W PV/ Solar Power Meter
This solar panel multimeter can test the maximum power point and open circuit voltage of photovoltaic panel. The photovoltaic panel power supplys method is more energy-saving and does not require additional electricity. If you are looking for this product, come and have a try, it will not let you down.
Fluke 28-II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 376 FC True-RMS Clamp Meter with iFlex
The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.
Fluke 568 Contact & Infrared Temp Gun
The Fluke 568 Infrared Thermometer is a combination contact and non-contact thermometer in one. It offers a wider temperature range than most other infrared thermometers while offering users more features controlled through an intuitive graphical display and menu. The simple, three-button on-screen menu interface (in 7 languages) is quick to use and makes even complex measurements easy. It takes just a few pushes of a button to adjust emissivity, record data, or turn on and off alarms. The 50:1 distance-to-spot ratio allows you to measure smaller objects from further away. And you can count on the rugged, ergonomic design to stand up to tough industrial, electrical, HVAC, and mechanical environments to help you work more efficiently in more applications.
Fluke 707Ex Intrinsically Safe mA Loop Calibrator
The Fluke 707Ex is an intrinsically safe loop calibrator for use in potential explosive environments. The Fluke 707Ex is certified in accordance with the ATEX directive in Zones 1 and 2. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2. It is also certified to operate in accordance with Factory Mutual N.I. Class 1, Division 2 areas Group A-D.
Fluke 712 RTD Process Calibrator
Fluke 867B Graphical Digital Multimeter
Fluke Ti32 Industrial Thermal Imager
- Delivers the clear, crisp images needed to find problems fast with its 320x240 sensor.
- Identify even the smallest temperature differences that could indicate problems with industry-leading thermal sensitivity (NETD).
- Automatic alignment (parallax correction) of visual and infrared images with Fluke patented IR-Fusion®
- Optional telephoto and wide-angle lenses are available for added versatility and special applications. (easily installable in the field)
Garmin eTrex 32x, Rugged Handheld GPS Navigator
- Explore confidently with the reliable handheld GPS
- 2.2” sunlight-readable color display with 240 x 320 display pixels for improved readability
- Preloaded with Topo Active maps with routable roads and trails for cycling and hiking
- Support for GPS and GLONASS satellite systems allows for tracking in more challenging environments than GPS alone
- 8 GB of internal memory for map downloads plus a micro SD card slot
- ETrex 32x adds a 3-axis compass and barometric altimeter
- Battery life: up to 25 hours in GPS mode with 2 AA batteries
Top Rated Products
BENETECH GM-1362 Temperature & Humidity Meter
Pressure Manometer GM-510
Digital Pocket Anemometer GM-816
Vibration Meter GM 63B
This product adopts piezoelectric effect of artificial polarized ceramic for design. it is suitable for monitoring of all kinds of vibrating mechanical facility, specially the vibration measurement of rotating and reciprocating machinery. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation etc. Field.
Digital Sound Level Meter GM 1357
Digital Sound Level Meter possesses the following features:
1. It is designed according to the IEC651 TYPE2 & ANSI S1.4 TYPE2
2. Accuracy up to +/- 1.5 dB
3. Measurement range: 30-130 dB
4. With two equivalent weighted sound pressure levels, A and C.
5. Fast & Slow dynamic characteristic modes.
6. AC and DC output for frequency analyzer level recorder, FFT analyzer, graphic recorder etc.
Mastech 5-in-1 multimeter Lux, Sound Level, Humidity,Temperature,True RMS MS8209
- Digital multimeter with 4 digits LCD display, with frequency, temperature, capacitance, sound level, brightness and humidity measurement
- Selectable Auto/Manaul ranging with very good sensitivity, resolution and accuracy
- Overload indication and protection, low battery indication, auto power off and back light
- In full comformance with IEC1010 and CAT III Standards
Infrared Thermometer GM-550
This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.
Infrared Thermometer GM-900
This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.
BENETECH GM-1850 InfraRed Thermometer
This unit consists of optics system, photoelectric sensor, signal amplifier, signal process circuit and LCD.The optics system collects the infrared energy emitted by object and focus onto the sensor. Then the sensor translates the energy into electricity signal which will be turned out to be readings shown on the LCD by the signal amplifier and signal process circuit. Equipped with RS232 data export function, this product is surely to be a great help to your work.
USB Interface Air Flow Anemometer GM 8902
* USB interface.
* Measures air velocity, temperature and quantity.
* Maximum, average and current measurements.
* Temperature display in Celsius & Fahrenheit.
* Wind speed units: m/s, Km/h, ft/min, knots, MPH.
* Data hold.
* LCD back-light display.
* Auto power off.
* Beaufort Scale indication.
* Wind chill indication.
* Low battery indication.
* Air velocity measuring range: 0 to 45 m/s.
* Air flow measuring range: 0 to 999900 m3/min.
* Wind temperature range: 0 to 45C, 32 to 113F.
* Power supply: 4x AAA battery (included).
Digital Sound Level Meter GM-1356
Micro Power Monitor GM-86
Ultrasonic Thickness Gauge GM 130
This unit is an intelligent handheld product, which adopts ultrasonic measuring principle, and is controlled by micro processor, provides quick and precise measurement of thickness for most of industrial material. This unit is widely used in various precise measurement for different hardware /parts in industrial realm; one of its important application is to monitor the level of thickness-decreasing during operation of various and pressure container. Diffusely applied in manufacture fields, metal processing, and commercial inspection.
Thermocouple Thermometer GM 1312
This device is able to measure the temperature of the liquid/vapors and surface temperature of a solid object, with a considerable wider measuring range than those of mercury thermometer and alcoholometer. It is suitable to be used both in the high temperature fields of blast furnace and cookery and the low temperature measuring for liquefied hydrogen and liquefied nitrogen etc.
Wood Moisture Meter GM-620
Food Thermometer GM 1311
This product is mainly used for measuring the food temperature pen type structure food-level stainless steel probe width of measuring scope. The probe-type food thermometer may be used for measuring the cooking temperature and grilling temperature being applicable for such various fields as refrigeration heating food processing and rubber and plastic processing.
Food Thermometer possesses the following features:
1.Temperature locking temperature
2.Maximum /minimum measuring function
3.Conversion function of ℃/℉ temperature unit
4.Low power prompt
5.LCD display
6.Automatic shutoff
7.Novel handy and portable appearance design
8.Using Japan imported sensors
Browse our brands
FREE SHIPPING
On Purchase of Rs 5000/-(Karachi)
FREE RETURN
On Selected Items
PAYMENT METHOD
COD & Bank Transfer
CONTACT US
Call us At 021-35686177