Standard ST-8890 Differential Pressure Manometers
₨0
Differential Pressure Manometers
The device measures Gauge/Differential Pressure , it features 11 selectable units of measurement: inH2O , psi, bar, mbar, kPa , inHg , mmHg ,ozin,ftH2O , cmH2O, kgcm. Additional features including Data Hold, Auto Power Off disabled , and an USB for capturing reading to a PC using optional software . Careful use of this meter will provide years of reliable service.
DT-8890B measures Differential Pressure from –20Pa to+20Pa and connect to the printer
GPT-4379 with USB interface.
DT-8890C measures Gauge/Differential Pressure from -13.86 inH2O to +13.86 inH2O ( 0.5 psi)
10
Items sold in last 3 minutes
Note: Product color may slightly vary due to photographic lighting sources or your screen setting.
Category: Standard
Related products
ST-125H
Standard ST9862 Infrared Video Thermometers
₨0
9860S/9861S/9862S Series Professional Infrared Video Thermometers with 2.2” color TFT LCD display & a microSD memory card for capturing Circular images(JPEG) or video(3GP) for viewing on your PC, providing fast, easy and accurate readings for most surface temperature measurements. The measurement of dewpoint will be very visiable for wet and dry proof. These serials products are with international patent and good hand for industrial measurements and data analyzing. The user can be back in office to analyze the measured Infrared temperature readings under the support of software.
Standard ST-616CT Humidity & Temperature Meters
₨0
Standard CO-180 Carbon Monoxide Meters
₨0
Carbon Monoxide Meters
CO-180/181 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Standard LA-1012 Cable Locator
₨0
The cable locator is a professional general-purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits, and locating interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dimly lit locations. For all applications (live or dead cables) without additional instruments; the Set includes a transmitter and a receiver; Proven digitally coded sender signal guarantees clear signal identification; Transmitter with LCD-display for transmitting level, transmitting code, and external voltage Receiver with backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity; Acoustical receiving signal switchable; Auto Power Off; Additional torch lamp function for working in dark environment; Additional transmitters are available for extension of to distinguish between several signals.
Standard ST-3348 True RMS 1000A AC Watt Clamp Meter.
₨0
Standard ST-8809A Professional Light Meters
₨0
Professional Light Meters
DT-8808/8809A light meters provide accurate display light levels in terms of Foot Candles (FC) or LUX over a wide range. Just turn the Function Switch to select the “lux” scale and set the range to desired range, then remove the photo detector to the light source in a horizontal position and read the illuminance nominal from the LCD. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long-life silicon photodiode inside
Measurement rate:1.5 times per second
Widest range to 40,000FC/400,000lux