

Featured Products
4 in 1 Multi Gas Analyzer AS8900
Smart Sensor gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave. This type of device is important because there are many gases that can be harmful to organic life.
Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion, etc. This type of device is widely used in industry and can be found in locations, such as on oil rigs, to monitor manufacture processes and emerging technologies such as photovoltaic.
They may also be used in firefighting. While many of the standard gas detector units were originally fabricated to detect one gas, modern multifunctional or multi-gas devices are capable of detecting several gases at once. Some detectors may be utilized as individual units to monitor small workspace areas, or units can be combined or linked together to create a protection system.
Clamp Meter TCM 7112
Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 568 Contact & Infrared Temp Gun
The Fluke 568 Infrared Thermometer is a combination contact and non-contact thermometer in one. It offers a wider temperature range than most other infrared thermometers while offering users more features controlled through an intuitive graphical display and menu. The simple, three-button on-screen menu interface (in 7 languages) is quick to use and makes even complex measurements easy. It takes just a few pushes of a button to adjust emissivity, record data, or turn on and off alarms. The 50:1 distance-to-spot ratio allows you to measure smaller objects from further away. And you can count on the rugged, ergonomic design to stand up to tough industrial, electrical, HVAC, and mechanical environments to help you work more efficiently in more applications.
Fluke 707Ex Intrinsically Safe mA Loop Calibrator
₨240,000
The Fluke 707Ex is an intrinsically safe loop calibrator for use in potential explosive environments. The Fluke 707Ex is certified in accordance with the ATEX directive in Zones 1 and 2. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2. It is also certified to operate in accordance with Factory Mutual N.I. Class 1, Division 2 areas Group A-D.
Fluke 712B RTD Calibrators
₨350,000
Key Features
*Highly accurate, full-featured, easy-to-use single-function RTD temperature calibrator
*Measures and simulates 13 different RTD types and resistance
*Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal
*Comes with a magnetic hanging tool designed for convenient hands-free operation
*Features configurable 0% and 100% source settings for quick 25% linearity checks
Fluke Ti32 Thermal Imagers
₨1,350,000
Top of the range High Definition Thermal Imager, that’s truly affordable.Built for top professionals, the Ti32 is a tool you can use everywhere, from troubleshooting actual defects to spotting potential failures during regular service and maintenance. With its superior image quality, optional lenses, field-swappable batteries and intuitive user interface, the rugged Ti32, a superior infrared camera is ideal for busy, front line engineers who are always on the go
FS2011 Nuclear Radiation Detector Dosimeter Alarm Tester
- FS2011 radiation Detector is used as a highly sensitive Geiger counter
- It is mainly responsible for the radiation of X, r, and hard β rays in various areas
- It is featured a swift response and a wide measurement range
- It is able to display the equivalent dosage rate and accumulative dosage in the work area
- This instrument is widely used to monitor individual safety protection and indicates the radiation
High Voltage Probe HVP-40
₨19,500
Top Rated Mastech & Benetech Products
Pressure Manometer GM-510
Infrared Thermometer GM-900
This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.
Mastech 5-in-1 multimeter Lux, Sound Level, Humidity,Temperature,True RMS MS8209
₨0
- Digital multimeter with 4 digits LCD display, with frequency, temperature, capacitance, sound level, brightness and humidity measurement
- Selectable Auto/Manaul ranging with very good sensitivity, resolution and accuracy
- Overload indication and protection, low battery indication, auto power off and back light
- In full comformance with IEC1010 and CAT III Standards
Vibration Meter GM 63B
This product adopts piezoelectric effect of artificial polarized ceramic for design. it is suitable for monitoring of all kinds of vibrating mechanical facility, specially the vibration measurement of rotating and reciprocating machinery. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation etc. Field.
Ultrasonic Thickness Gauge GM 130
This unit is an intelligent handheld product, which adopts ultrasonic measuring principle, and is controlled by micro processor, provides quick and precise measurement of thickness for most of industrial material. This unit is widely used in various precise measurement for different hardware /parts in industrial realm; one of its important application is to monitor the level of thickness-decreasing during operation of various and pressure container. Diffusely applied in manufacture fields, metal processing, and commercial inspection.
Digital Air Flow Anemometer GM 8901
LCD digital display anemometer is the ideal equipment to measure wind speed and temperature. Compact and lightweight, so you can fit in your pocket, very convenient. Designed with LED back light, it can be used in places without light. It can be used in places such as surfing, sailing, fishing, kite flying, climbing, etc. It can also be used for industrial and home use. Five wind speed units: m / s, km / h, ft / min, knots and mph
Top Rated Noyafa & Garmin Products
NF-272L Noyafa Laser Distance Meter 80m
₨6,800
Hand-held Metal Detector NF-511
₨6,750
Noyafa NF-8209 Advanced Network Cable Tracker, Toner & Probe with PoE
₨11,800
Network Cable Tester NF-8209
Item Specifics:
OEM / ODM : Yes
Brand Name : Noyafa
Model Number : NF-8209
Place of Origin : Shenzhen.China
Main Function : Detecting PoE voltage, current, power, PoE standards Power supply modes, Verify RJ45 cables
Tracking Type : PoE, RJ45 Cable
Other Function : Lighting & NCV(non-contact voltage)
NF-816 Noyafa Underground Wire Locator
₨9,500
Noyafa NF-521 Contactless Thermal Imaging Device
₨35,500
NF-272L Noyafa Laser Distance Meter 60m
₨6,000
Browse our brands











