Standard ST-174B Humidity/Temperature & Pressure Dataloggers
₨0
Humidity/Temperature & Pressure Dataloggers
Alarm setup and indication
Recording and low battery indication
Manual and automatic start mode
USB port for data traffic and power supply
Status indication via Red/Yellow LED and Green LED
13
Items sold in last 3 minutes
Note: Product color may slightly vary due to photographic lighting sources or your screen setting.
Category: Standard
Related products
Standard ST-8809A Professional Light Meters
₨0
Professional Light Meters
DT-8808/8809A light meters provide accurate display light levels in terms of Foot Candles (FC) or LUX over a wide range. Just turn the Function Switch to select the “lux” scale and set the range to desired range, then remove the photo detector to the light source in a horizontal position and read the illuminance nominal from the LCD. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long-life silicon photodiode inside
Measurement rate:1.5 times per second
Widest range to 40,000FC/400,000lux
![](https://www.cem-instruments.com:5010/en/upload/20160803/57a1499460b3c.png)
Standard LA-1012 Cable Locator
₨0
The cable locator is a professional general-purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits, and locating interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dimly lit locations. For all applications (live or dead cables) without additional instruments; the Set includes a transmitter and a receiver; Proven digitally coded sender signal guarantees clear signal identification; Transmitter with LCD-display for transmitting level, transmitting code, and external voltage Receiver with backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity; Acoustical receiving signal switchable; Auto Power Off; Additional torch lamp function for working in dark environment; Additional transmitters are available for extension of to distinguish between several signals.
Standard ST-815 Series Sound Level Meters
₨0
Series Sound Level Meters
DT-815 Sound Level Meter is designed for noise project, quality control, illness prevention & cure and all kinds of environment sounds measurements. It is applied to the sounds measurement at factory, school, office, traffic access and household, etc. This unit confirms to the IEC61672-1 class 2 for Sound Level Meter
ST-125H
Standard ST-3348 True RMS 1000A AC Watt Clamp Meter.
₨0
Standard ST-625 Humidity & Temperature Meters
₨0
Humidity & Temperature Meters
DT-625 is digital Humidity & Temperature Meter with Wet Bulb Temperature& Dew Point temperature, which has been designed to combine the functions of Humidity Meter, Temperature Meter, Wet Bulb Temperature and Dew point temperature. It is an ideal Humidity & Temperature Meter with scores of practical applications for laboratorial, industrial, Engineer and professional use. 615 is Humidity meter with Air and type K thermocouple thermometer.
Large, easy-to-read backlit LCD with dual display; Fast Response Time: 10s (90% at 25ºC still air)
2% High Accuracy (625); Dew Point Temperature (-30ºC~100ºC/-22ºF~199ºF) (625)
Wet Bulb Temperature ( 0ºC~80ºC/32ºF~176ºF) (625); Resolution 0.1%RH, 0.1ºC/0.1ºF
Max/Min Hold and Data Hold Function (625); Microprocessor-based Design (625)
Dual Display Temperature & Humidity
Standard ST-157 Coating Thickness Tester
₨0
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques. The measuring data is easily transferred to a PC for edit and storage.
iCTT software
for Coating Thickness Tester
Meterbox iCTT - In worldwide, Meterbox iCTT is the first issue for the coating thickness tester to communicate with the smartphone by Bluetooth. The friendly user interface, multifunction scene mode, and standard reference data bring a new user experience and make the work relaxed.
Meterbox iCTT allows reading the measured real-time data by Bluetooth, the displayed table and chart can be recorded and analyzed.
The user can check the history data anytime and manage the measured readings easily by Meterbox iCTT.