Showing all 18 results

Fluke 1503 Insulation Resistance Meter

62,000
  • A rugged, compact insulation resistance tester for residential and commercial electricians
  • Performs insulation tests from 0.01 MΩ to 2000 MΩ
  • Offers two insulation test voltages: 500 V and 1000 V
  • Includes live circuit detection to prevent insulation test if voltage >30 V is detected
  • Measures resistance from 0.01 Ω to 20.00 kΩ

Fluke 1507 Insulation Resistance Tester

185,000
  • Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
  • Automatically calculates Polarization Index and Dielectric Absorption Ratio
  • Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
  • Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V

Fluke 1587 FC Insulation Multimeter

235,000
  • Safety first. Connect the insulation tester then keep yourself out of harm's way by monitoring your test measurements remotely.
  • Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
  • Quickly find problems by saving and comparing measurements over time on a wireless device.

Fluke 28-II Ex Intrinsically Safe True RMS Digital Multimeter

5,750,000
  • A completely sealed, IP67 rated case
  • Withstands drops up to 10 ft or 3 m (with holster)
  • Dustproof per IEC 60529 IP6x
  • Waterproof per IEC 60529 IPx7
  • CAT III 1000 V, CAT IV 600 V
  • Reversible holster for added protection of the display when not in use

Fluke 712 RTD Process Calibrator

  • Measure temperature from RTD output
  • Simulate RTD output
  • Operates with seven types of RTDs
  • Measure additional RTDs using the Ohms measurement function
  • Simulate additional RTDs using Ohms source function
  • ºF or ºC selectable

Fluke 725 Multifunction Process Calibrator

1,250,000
  • Calibration of both temperature and pressure transmitters
  • Measure/source/simulate mA loop parameters
  • Measure and source mA, Volts DC, frequency, and resistance
  • Built-in 24 V loop power supply
  • Store and recall frequently used calibration setups

Fluke 744 Documenting Process Calibrator-HART

1,020,000
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters, and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during the test using a loop supply with simultaneous mA measurement

Fluke 867B Graphical Digital Multimeter

135,000
  • Waveform Display to 1 MHz Safety-rated to 1000V
  • Digital Display/Counts
  • Selectable True-RMS or Average Sensing
  • Continuity/Conductance/Capacitance
  • Duty Cycle/Pulse Width/Period/Frequency
  • Min/Max/Average with Time Stamp

Fluke 922 Airflow Meter/Kit

195,000
  • Powerful meter provides differential and static pressure, air velocity and flow readings
  • Convenient colored hoses help proper interpretation of pressure readings
  • Easy to use without sacrificing performance
  • Bright, backlit display for clear viewing in all environments
  • User-defined duct shape and size for maximum airflow accuracy
  • Resolution down to 0.001 in H2O
  • 99 point data storage capacity

Fluke 922 Airflow Meter/Micromanometer

112,000
  • Powerful meter provides differential and static pressure, air velocity, and flow readings
  • Convenient colored hoses help proper interpretation of pressure readings
  • Easy to use without sacrificing performance
  • Bright, backlit display for clear viewing in all environments
  • User-defined duct shape and size for maximum airflow accuracy
  • Resolution down to 0.001 inH2O
  • 99-point data storage capacity
  • Min/Max/Average/Hold functions for easy data analysis

Fluke 931 Contact and Non-Contact Dual-Purpose Tachometers

98,500
  • 6-digit backlight display reads the data clearly
  • Signal detection reminder avoids invalid detection actions
  • Maximum/minimum/average value and final readings
  • Setting/Turning off the automatic power-off function
  • Small size and easy to hold
  • Easy switching of the contact and non-contact measurement modes
  • Different speed measuring heads and rotational speeds adapt to different measurement occasions

Fluke 941 Light illuminance Meter

62,000
  • Measure in lux or foot-candles, with one button to switch between display options
  • Measuring range up to 20,000 lux or foot candles
  • Data hold to freeze reading on the digital display
  • Min/max ability to show high and low readings
  • Auto power off to save battery life
  • Includes protective sensor cap

Fluke Ti32 Industrial Thermal Imager

1,350,000
  • Delivers the clear, crisp images needed to find problems fast with its 320x240 sensor.
  • Identify even the smallest temperature differences that could indicate problems with industry-leading thermal sensitivity (NETD).
  • Automatic alignment (parallax correction) of visual and infrared images with Fluke patented IR-Fusion®
  • Optional telephoto and wide-angle lenses are available for added versatility and special applications. (easily installable in the field)

Fluke TL20 Industrial Test Lead Kit

2,200
  • One pair each of TL22 silicone test leads, AC20 heavy-duty alligator clips, and TP20 sharp industrial test probes
  • CAT III 1000 V, 10 A rating

Fluke TL220 SureGrip™ Industrial Test Lead Set

19,000
SureGrip design so you can do your work comfortably. With interchangeable test lead sets for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4mm shrouded banana connectors. This handy all-in-one kit includes:
  • AC220 SureGrip
  • Alligator Clip Set
  • TP220 SureGrip
  • Insulated Test Probe Set
  • TL224 SureGrip Silicone Test Lead Set

Fluke TL75 Hard Point™ Test Lead Set

8,500
  • Test lead and probe in one unit
  • 48 inches (1.22 meter) long
  • CAT II 1000 V, 10 A rated
  • CAT IV 600 V, CAT III 1000 V rated with protective cap
  • CSA Listed

Fluke TL81A Deluxe Electronic Test Lead Kit

27,800
The TL81 kit consists of a quad-fold nylon pouch containing two each (one black and one red) of the following

Fluke VT04 Visual IR Thermometer

115,000
 
  • Compact and intuitive visual IR thermometer that blends a visual image with an infrared heat map overlay
  • Features NEAR and FAR mode that automatically aligns visual and thermal lenses to correctly locate issues
  • Includes a center measurement box showing the exact area of temperature measurement on the screen