Standard ST-174B Humidity/Temperature & Pressure Dataloggers
₨0
Humidity/Temperature & Pressure Dataloggers
Alarm setup and indication
Recording and low battery indication
Manual and automatic start mode
USB port for data traffic and power supply
Status indication via Red/Yellow LED and Green LED
10
Items sold in last 3 minutes
Note: Product color may slightly vary due to photographic lighting sources or your screen setting.
Category: Standard
Related products
Standard ST-5300B Earth Ground Resistance Testers
₨0
Earth Ground Resistance Testers
Electronic Digital Earth Resistance Tester is a direct replacement of the conventional hand generator type tester. It is designed for the measurement of the resistance of earthing used in the electrical equipment as well as for the measurement of ground resistivity. It can be used for measurements of the other low regular and liquid resistances. It can also be used for the measurement of voltage AC, voltage DC, and resistance.
This instrument has wide applications for testing earthing installation in power-based industries, telecommunication networks electrical traction systems, etc.
Standard ST-156 Coating Thickness Tester
₨0
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques
Non-magnetic coatings (e.g. paint, zinc) on steel
Insulating coatings (e.g. paint) on no-ferrous metals
No-ferrous metals coatings on insulating substrates
Menu operation system
Two working modes: DIRECT and GROUP mode
One-point calibration, two points calibration, and basic calibration easily
Delete single readings and all group readings easily
Low battery, error indication
USB interface for PC software
Standard BS-150 Video Borescope
₨0
Standard ST-616CT Humidity & Temperature Meters
₨0
ST-70
Standard ST-8851 Sound Level Meters
₨0
ST-125H
Standard ST-8809A Professional Light Meters
₨0
Professional Light Meters
DT-8808/8809A light meters provide accurate display light levels in terms of Foot Candles (FC) or LUX over a wide range. Just turn the Function Switch to select the “lux” scale and set the range to desired range, then remove the photo detector to the light source in a horizontal position and read the illuminance nominal from the LCD. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long-life silicon photodiode inside
Measurement rate:1.5 times per second
Widest range to 40,000FC/400,000lux