Standard ST-3352 1500A AC/DC True RMS Clamp Meters with inrush Current Function
₨0
1500A AC/DC True RMS Clamp Meters with inrush Current Function
DT-3351 is a True RMS 1500A AC/DC Clamp Meter, and 3352 is a True RMS Power Meter, which provides much safer measurements with a double molded plastic housing design. True RMS AC/DC voltage and current measurements, 40,000 counts, and 0.1% basic DC accuracy within the reach of more customers. The large LCD with analog bar graph and backlit ensures that readings are easy to read under all circumstances. Measuring starting current for motors, lighting, etc. is easy with their rush current function. All inputs are protected by EN 610101-1 CATIV 600V/CATIII 1000V.
13
Items sold in last 3 minutes
Note: Product color may slightly vary due to photographic lighting sources or your screen setting.
Category: Standard
Related products
Standard ST-625 Humidity & Temperature Meters
₨0
Humidity & Temperature Meters
DT-625 is digital Humidity & Temperature Meter with Wet Bulb Temperature& Dew Point temperature, which has been designed to combine the functions of Humidity Meter, Temperature Meter, Wet Bulb Temperature and Dew point temperature. It is an ideal Humidity & Temperature Meter with scores of practical applications for laboratorial, industrial, Engineer and professional use. 615 is Humidity meter with Air and type K thermocouple thermometer.
Large, easy-to-read backlit LCD with dual display; Fast Response Time: 10s (90% at 25ºC still air)
2% High Accuracy (625); Dew Point Temperature (-30ºC~100ºC/-22ºF~199ºF) (625)
Wet Bulb Temperature ( 0ºC~80ºC/32ºF~176ºF) (625); Resolution 0.1%RH, 0.1ºC/0.1ºF
Max/Min Hold and Data Hold Function (625); Microprocessor-based Design (625)
Dual Display Temperature & Humidity
Standard ST-616CT Humidity & Temperature Meters
₨0
Standard LA-1012 Cable Locator
₨0
The cable locator is a professional general-purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits, and locating interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dimly lit locations. For all applications (live or dead cables) without additional instruments; the Set includes a transmitter and a receiver; Proven digitally coded sender signal guarantees clear signal identification; Transmitter with LCD-display for transmitting level, transmitting code, and external voltage Receiver with backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity; Acoustical receiving signal switchable; Auto Power Off; Additional torch lamp function for working in dark environment; Additional transmitters are available for extension of to distinguish between several signals.
Standard ST-8809A Professional Light Meters
₨0
Professional Light Meters
DT-8808/8809A light meters provide accurate display light levels in terms of Foot Candles (FC) or LUX over a wide range. Just turn the Function Switch to select the “lux” scale and set the range to desired range, then remove the photo detector to the light source in a horizontal position and read the illuminance nominal from the LCD. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long-life silicon photodiode inside
Measurement rate:1.5 times per second
Widest range to 40,000FC/400,000lux
![](https://www.cem-instruments.com:5010/en/upload/20160803/57a1499460b3c.png)
ST-125H
Standard ST-5500 Insulation Testers
₨0
Standard ST-156 Coating Thickness Tester
₨0
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques
Non-magnetic coatings (e.g. paint, zinc) on steel
Insulating coatings (e.g. paint) on no-ferrous metals
No-ferrous metals coatings on insulating substrates
Menu operation system
Two working modes: DIRECT and GROUP mode
One-point calibration, two points calibration, and basic calibration easily
Delete single readings and all group readings easily
Low battery, error indication
USB interface for PC software