Standard SC-05 Sound Level Calibrator
Sound Level Calibrator
94dB and 114dB Sound Calibration at 1kHz; Accurate and simple to use; Fits 1/2” diameter microphone.
Output Sound Pressure Levels 114dB and 94dB re 20 uPa under refrence conditions.
Output Frequency 1000Hz, ±4%
Reference Temperature Conditions >23ºC (73ºF)
Atmospheric pressure >1013 mbar (760mm of Hg)
Relative humidity >65%RH
Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
Standard ST-174B Humidity/Temperature & Pressure Dataloggers
Standard ST-178A 3-Axis Vibration Dataloggers
3-Axis Vibration Dataloggers
DT-178A is engineered to record acceleration data of vibration,it will record and time 3-axis vibrations and peaks to provide a history of shock/vibration conditions. and it will record the time when freefall happens. It measures and computes real-time spectral data using an FFT(Fast Fourier Transform) from 0 to 60 Hertz.The 178B is Vibration, humidity and temperature Datalogger
Standard ST-186 Anemometer Dataloggers
Standard ST-191A Plug-PDF Temperature/Humidity dataloggers
Standard ST-9054 RCD Tester
RCD Tester
Fully programmed operation
Accurate digital read out of tripping time and Current
450ms readout for testing latest delay action breakers
Two LED lamps give quick check for correct wiring
Compact, lightweight and simple to operate
Zero cross circuitry permits testing at 0° and 180° portion of sine wave
Standard AT-8 Contact/Non-contact Digital Tachometers
Standard BS-150 Video Borescope
Standard CO-180 Carbon Monoxide Meters
Carbon Monoxide Meters
CO-180/181 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Standard CTL-1000 Cable Length Tester
Standard LA-1012 Cable Locator
The cable locator is a professional general-purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits, and locating interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dimly lit locations. For all applications (live or dead cables) without additional instruments; the Set includes a transmitter and a receiver; Proven digitally coded sender signal guarantees clear signal identification; Transmitter with LCD-display for transmitting level, transmitting code, and external voltage Receiver with backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity; Acoustical receiving signal switchable; Auto Power Off; Additional torch lamp function for working in dark environment; Additional transmitters are available for extension of to distinguish between several signals.
Standard ST-128M Building Material Moisture Meter
128M/128H is the NON-Contact Moisture Meter, It is an electronic dampness indicator with a measuring process working on the principle of high frequency. The instrument is used for non-destructively tracing dampness in building materials of all kinds as well as for detecting damp distribution in walls, ceilings, and floors. It is particularly suitable for pre-testing the readiness of building materials for covering before CM measurement.
Standard ST-1307 Solar Power Meter
Solar Power Meter
Sunlight measurement up to 1999w/m2 or 634BTU/(ft2*h)
High accuracy and rapid response
Data Hold funtction to hold measurement values
Unit and sign display for easy reading
Measuring unit selection among w/m2 and BTU/(ft2*h)
Manual scale selection
Direct reading with no adjustments needed
Maximum and minimum values
Low battery indication
Standard ST-1309 Light Meters
Light Meters
DT-1300/1301/1308 are easy to use with pocket size and light weight, providing accurate display light level in terms of Foot Candles (FC) or LUX over wide range. Just turning the Function Switch to select the “lux” scale and setting the range to desired range, then removing the photo detector to light source in a horizontal position and reading the illuminance norminal from the LCD display. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long life silicon photo diode inside
Measurement rate:1.5 times per second
Standard ST-155 Intelligent Semiconductor Analyzer
Intelligent Semiconductor Analyzer
The intelligent semiconductor Component analyzer offers great features together with refreshing simplicity.
Automatic component type identification
Automatic pinout identification, just connect any way round.
Special feature identification such as diode protection and resistor shunts.
Gain measurement for bipolar transistors.
Leakage current measurement for bipolar transistors.
Silicon and Germanium detection for bipolar transistors.
Gate threshold measurement for Enhancement Mode MOSFETs.
Semiconductor forward voltage measurement for diodes, LEDs and transistor Base-Emitter junctions.
Automatic and manual power-off.
Standard ST-156 Coating Thickness Tester
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques
Non-magnetic coatings (e.g. paint, zinc) on steel
Insulating coatings (e.g. paint) on no-ferrous metals
No-ferrous metals coatings on insulating substrates
Menu operation system
Two working modes: DIRECT and GROUP mode
One-point calibration, two points calibration, and basic calibration easily
Delete single readings and all group readings easily
Low battery, error indication
USB interface for PC software
Standard ST-157 Coating Thickness Tester
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques. The measuring data is easily transferred to a PC for edit and storage.
iCTT software
for Coating Thickness Tester
Meterbox iCTT - In worldwide, Meterbox iCTT is the first issue for the coating thickness tester to communicate with the smartphone by Bluetooth. The friendly user interface, multifunction scene mode, and standard reference data bring a new user experience and make the work relaxed.
Meterbox iCTT allows reading the measured real-time data by Bluetooth, the displayed table and chart can be recorded and analyzed.
The user can check the history data anytime and manage the measured readings easily by Meterbox iCTT.
Standard ST-171 Temperature and Humidity Dataloggers
Temperature and Humidity Dataloggers
You can monitor temperature and humidity values efficiently and conveniently for long time periods by using the Datalogger.
The readings are saved in the logger and simply read out by your PC with USB interface.
Memory for 16000 (171) readings
Temperature datalogger (170)
Freely selectable measurement cycle from 2sec. to 24h
Battery life: more than 3 years
Display all status information through two LEDs
Download collected data through USB interface
Alarm display if user-defined maximum/minimum values exceed
Analysis software used to view graph for logging data
Standard ST-172 Temperature & Humidity Meter
ST172 is used to monitor temperature and humidity values efficiently and conveniently for long periods of time by using the data logger functionality. The dataloggers are saved in the logger and simply read out by your PC with a USB interface. The LCD shows current readings, MAX, MIN, and signs of alarm