View cart “Standard IR-91 Panel Infrared Thermometer” has been added to your cart.
Standard ST-8809A Professional Light Meters
₨0
Professional Light Meters
DT-8808/8809A light meters provide accurate display light levels in terms of Foot Candles (FC) or LUX over a wide range. Just turn the Function Switch to select the “lux” scale and set the range to desired range, then remove the photo detector to the light source in a horizontal position and read the illuminance nominal from the LCD. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long-life silicon photodiode inside
Measurement rate:1.5 times per second
Widest range to 40,000FC/400,000lux
12
Items sold in last 3 minutes
Note: Product color may slightly vary due to photographic lighting sources or your screen setting.
Category: Standard
Related products
Standard ST-616CT Humidity & Temperature Meters
₨0
Standard ST-185 Light Datalogger
₨0
Standard ST-901 Phase Rotation Indicator / Socket Polarity and Earth Leakage Tester
₨0
Standard ST-172 Temperature & Humidity Meter
ST172 is used to monitor temperature and humidity values efficiently and conveniently for long periods of time by using the data logger functionality. The dataloggers are saved in the logger and simply read out by your PC with a USB interface. The LCD shows current readings, MAX, MIN, and signs of alarm
Standard ST-815 Series Sound Level Meters
₨0
Series Sound Level Meters
DT-815 Sound Level Meter is designed for noise project, quality control, illness prevention & cure and all kinds of environment sounds measurements. It is applied to the sounds measurement at factory, school, office, traffic access and household, etc. This unit confirms to the IEC61672-1 class 2 for Sound Level Meter
Standard CO-180 Carbon Monoxide Meters
₨0
Carbon Monoxide Meters
CO-180/181 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Standard ST-156 Coating Thickness Tester
₨0
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques
Non-magnetic coatings (e.g. paint, zinc) on steel
Insulating coatings (e.g. paint) on no-ferrous metals
No-ferrous metals coatings on insulating substrates
Menu operation system
Two working modes: DIRECT and GROUP mode
One-point calibration, two points calibration, and basic calibration easily
Delete single readings and all group readings easily
Low battery, error indication
USB interface for PC software