Lutron TM-914C Thermometer Dual Channel
Pocket size & compact housing.
* Build-in precision cold junction
* Dual channel input. compensation circuit.
* LCD allows clear read-out even at
* Thermocouple sensor for Temperature high ambient light environment. measurement, and fast response time.
* Operates from DC 9V battery.
* Used durable, long-lasting
* Low power consumption. components, including a strong, light
* Meet any standard type K ( NiCr-NiAl ) weight ABS-plastic housing case. probe.
* Full line, wide range optional thermocouple
* Fitted with standard type K input probe. measuring socket.
* Optional holster.
Lutron VB-8200 Vibration Meter
VB-8200 is a vibration meter with a separate professional vibration sensor.
* Frequency range 10 Hz – 1 kHz,
* Sensitivity relative meets ISO 2954.
* Supply with vibration sensor & magnetic base, full set.
* Velocity range: 200 mm/s.
* Acceleration range: 200 m/s^2
* RMS & Peak measurement.
* Data hold, Memory ( Max. & Min. ).
* Separate vibration probe.
* RS 232 computer interface.
* Optional data acquisition software.
* Microcomputer circuit.
* Auto shut-off saves battery life.
* Hard carrying case included.
Lutron VB-8210 Vibration Meter
LUTRON VB-8210 is a professional vibration meter with a vibration sensor and magnetic base.
* Frequency range 10 Hz - 1 kHz, sensitivity relative meet ISO 2954
* Velocity measuring range 200 mm/s, 7.87 inch/sec.
* Acceleration measuring range 200 m/s2 , 656 ft/s2
* RMS and Peak measurement
* Metric and Imperial display unit
* Super large LCD display
* Data hold to freeze the reading
* Memory function to record maximum and minimum reading with recall
* High-performance microcomputer circuit
* Low-battery indicator
* Auto power-off (to save battery)
* Separable vibration probe, easy operating
* RS 232 computer interface
Mastech 5-in-1 multimeter Lux, Sound Level, Humidity,Temperature,True RMS MS8209
- Digital multimeter with 4 digits LCD display, with frequency, temperature, capacitance, sound level, brightness and humidity measurement
- Selectable Auto/Manaul ranging with very good sensitivity, resolution and accuracy
- Overload indication and protection, low battery indication, auto power off and back light
- In full comformance with IEC1010 and CAT III Standards
MASTECH MS5203 Insulation Testers
Micro Power Monitor GM-86
MINI Optical Power Meter NF-908
NF 8200 Noyafa Cable Tester for Telephone and Network
NF-272L Noyafa Laser Distance Meter 60m
NF-272L Noyafa Laser Distance Meter 100m
NF-272L Noyafa Laser Distance Meter 80m
NF-816 Noyafa Underground Wire Locator
Noyafa NF-198 GPS Land Measuring Instrument / Land Meter
Noyafa NF-271 Laser Distance Measurer Handheld Rangefinder
Noyafa NF-488 Power over Ethernet (PoE) Checker Tester
Noyafa NF-521 Contactless Thermal Imaging Device
The temperature measuring range is -10°C ~ 400°C
Resolution 32×32 pixel resolution
IR thermal imaging camera is a 2-megapixel white lens and 2.4 TFT LCD screen to visualize targets more flexibly.
The integrated visual display combines infrared and visible images for simpler analysis and editing and optimizing images.
Noyafa NF-8209 Advanced Network Cable Tracker, Toner & Probe with PoE
Network Cable Tester NF-8209
Item Specifics:
OEM / ODM : Yes
Brand Name : Noyafa
Model Number : NF-8209
Place of Origin : Shenzhen.China
Main Function : Detecting PoE voltage, current, power, PoE standards Power supply modes, Verify RJ45 cables
Tracking Type : PoE, RJ45 Cable
Other Function : Lighting & NCV(non-contact voltage)
Noyafa NF-826 Professional Underground Cable Locator
Pressure Manometer GM-510
Pressure Manometer GM-511
Pressure Manometer GM-520
Pro’s Kit ST-12B Multifunctional Tool Bag
Pro’sKit 608-611C Antistatic Bracelet Adjustable
Pro’skit SS-206H Electric Soldering Station Anti-static
Pro’sKit SS-207B Digital Soldering Station
Pro’sKit SS-989H 2 In1 SMD Hot Air Rework Station
PRO’SKIT MA-1209LI MAGNIFIER & LAMP
Pro’sKit SN-390 Adjustable Soldering Clamp PCB Holder
The SN390 Adjustable Printed Circuit Board Holder Frame PCB Soldering Assembly Stand Clamp is ideal for clamping PCB for soldering, desoldering features 2 adjustable grips on a retractable stand to accommodate various board sizes up to 200mm wide and up to 3mm thick. The adjustable clamps allow the PCB to rotate 360 degrees and stay set in any position.
Refrigerant Leak Detector HLd 200
Smart Sensor AR944 Under Ground Metal Detector
SMART SENSOR ST-9332 Digital Coating Thickness Gauge
Standard SC-05 Sound Level Calibrator
Sound Level Calibrator
94dB and 114dB Sound Calibration at 1kHz; Accurate and simple to use; Fits 1/2” diameter microphone.
Output Sound Pressure Levels 114dB and 94dB re 20 uPa under refrence conditions.
Output Frequency 1000Hz, ±4%
Reference Temperature Conditions >23ºC (73ºF)
Atmospheric pressure >1013 mbar (760mm of Hg)
Relative humidity >65%RH
Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
Standard ST-174B Humidity/Temperature & Pressure Dataloggers
Standard ST-178A 3-Axis Vibration Dataloggers
3-Axis Vibration Dataloggers
DT-178A is engineered to record acceleration data of vibration,it will record and time 3-axis vibrations and peaks to provide a history of shock/vibration conditions. and it will record the time when freefall happens. It measures and computes real-time spectral data using an FFT(Fast Fourier Transform) from 0 to 60 Hertz.The 178B is Vibration, humidity and temperature Datalogger
Standard ST-186 Anemometer Dataloggers
Standard ST-191A Plug-PDF Temperature/Humidity dataloggers
Standard ST-9054 RCD Tester
RCD Tester
Fully programmed operation
Accurate digital read out of tripping time and Current
450ms readout for testing latest delay action breakers
Two LED lamps give quick check for correct wiring
Compact, lightweight and simple to operate
Zero cross circuitry permits testing at 0° and 180° portion of sine wave
Standard AT-8 Contact/Non-contact Digital Tachometers
Standard BS-150 Video Borescope
Standard CO-180 Carbon Monoxide Meters
Carbon Monoxide Meters
CO-180/181 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Standard CTL-1000 Cable Length Tester
Standard LA-1012 Cable Locator
The cable locator is a professional general-purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits, and locating interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dimly lit locations. For all applications (live or dead cables) without additional instruments; the Set includes a transmitter and a receiver; Proven digitally coded sender signal guarantees clear signal identification; Transmitter with LCD-display for transmitting level, transmitting code, and external voltage Receiver with backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity; Acoustical receiving signal switchable; Auto Power Off; Additional torch lamp function for working in dark environment; Additional transmitters are available for extension of to distinguish between several signals.
Standard ST-128M Building Material Moisture Meter
128M/128H is the NON-Contact Moisture Meter, It is an electronic dampness indicator with a measuring process working on the principle of high frequency. The instrument is used for non-destructively tracing dampness in building materials of all kinds as well as for detecting damp distribution in walls, ceilings, and floors. It is particularly suitable for pre-testing the readiness of building materials for covering before CM measurement.
Standard ST-1307 Solar Power Meter
Solar Power Meter
Sunlight measurement up to 1999w/m2 or 634BTU/(ft2*h)
High accuracy and rapid response
Data Hold funtction to hold measurement values
Unit and sign display for easy reading
Measuring unit selection among w/m2 and BTU/(ft2*h)
Manual scale selection
Direct reading with no adjustments needed
Maximum and minimum values
Low battery indication
Standard ST-1309 Light Meters
Light Meters
DT-1300/1301/1308 are easy to use with pocket size and light weight, providing accurate display light level in terms of Foot Candles (FC) or LUX over wide range. Just turning the Function Switch to select the “lux” scale and setting the range to desired range, then removing the photo detector to light source in a horizontal position and reading the illuminance norminal from the LCD display. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long life silicon photo diode inside
Measurement rate:1.5 times per second
Standard ST-155 Intelligent Semiconductor Analyzer
Intelligent Semiconductor Analyzer
The intelligent semiconductor Component analyzer offers great features together with refreshing simplicity.
Automatic component type identification
Automatic pinout identification, just connect any way round.
Special feature identification such as diode protection and resistor shunts.
Gain measurement for bipolar transistors.
Leakage current measurement for bipolar transistors.
Silicon and Germanium detection for bipolar transistors.
Gate threshold measurement for Enhancement Mode MOSFETs.
Semiconductor forward voltage measurement for diodes, LEDs and transistor Base-Emitter junctions.
Automatic and manual power-off.