Standard CO-180 Carbon Monoxide Meters
Carbon Monoxide Meters
CO-180/181 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Standard CTL-1000 Cable Length Tester
Standard LA-1012 Cable Locator
The cable locator is a professional general-purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits, and locating interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose made carry case. The receiver also incorporates a torch function for working in dimly lit locations. For all applications (live or dead cables) without additional instruments; the Set includes a transmitter and a receiver; Proven digitally coded sender signal guarantees clear signal identification; Transmitter with LCD-display for transmitting level, transmitting code, and external voltage Receiver with backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity; Acoustical receiving signal switchable; Auto Power Off; Additional torch lamp function for working in dark environment; Additional transmitters are available for extension of to distinguish between several signals.
Standard ST-128M Building Material Moisture Meter
128M/128H is the NON-Contact Moisture Meter, It is an electronic dampness indicator with a measuring process working on the principle of high frequency. The instrument is used for non-destructively tracing dampness in building materials of all kinds as well as for detecting damp distribution in walls, ceilings, and floors. It is particularly suitable for pre-testing the readiness of building materials for covering before CM measurement.
Standard ST-1307 Solar Power Meter
Solar Power Meter
Sunlight measurement up to 1999w/m2 or 634BTU/(ft2*h)
High accuracy and rapid response
Data Hold funtction to hold measurement values
Unit and sign display for easy reading
Measuring unit selection among w/m2 and BTU/(ft2*h)
Manual scale selection
Direct reading with no adjustments needed
Maximum and minimum values
Low battery indication
Standard ST-1309 Light Meters
Light Meters
DT-1300/1301/1308 are easy to use with pocket size and light weight, providing accurate display light level in terms of Foot Candles (FC) or LUX over wide range. Just turning the Function Switch to select the “lux” scale and setting the range to desired range, then removing the photo detector to light source in a horizontal position and reading the illuminance norminal from the LCD display. When the measurement is completed, replace the photodetector from the light source.
Over-range indication
Long life silicon photo diode inside
Measurement rate:1.5 times per second
Standard ST-155 Intelligent Semiconductor Analyzer
Intelligent Semiconductor Analyzer
The intelligent semiconductor Component analyzer offers great features together with refreshing simplicity.
Automatic component type identification
Automatic pinout identification, just connect any way round.
Special feature identification such as diode protection and resistor shunts.
Gain measurement for bipolar transistors.
Leakage current measurement for bipolar transistors.
Silicon and Germanium detection for bipolar transistors.
Gate threshold measurement for Enhancement Mode MOSFETs.
Semiconductor forward voltage measurement for diodes, LEDs and transistor Base-Emitter junctions.
Automatic and manual power-off.
Standard ST-156 Coating Thickness Tester
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques
Non-magnetic coatings (e.g. paint, zinc) on steel
Insulating coatings (e.g. paint) on no-ferrous metals
No-ferrous metals coatings on insulating substrates
Menu operation system
Two working modes: DIRECT and GROUP mode
One-point calibration, two points calibration, and basic calibration easily
Delete single readings and all group readings easily
Low battery, error indication
USB interface for PC software
Standard ST-157 Coating Thickness Tester
Coating Thickness Tester
Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques. The measuring data is easily transferred to a PC for edit and storage.
iCTT software
for Coating Thickness Tester
Meterbox iCTT - In worldwide, Meterbox iCTT is the first issue for the coating thickness tester to communicate with the smartphone by Bluetooth. The friendly user interface, multifunction scene mode, and standard reference data bring a new user experience and make the work relaxed.
Meterbox iCTT allows reading the measured real-time data by Bluetooth, the displayed table and chart can be recorded and analyzed.
The user can check the history data anytime and manage the measured readings easily by Meterbox iCTT.
Standard ST-171 Temperature and Humidity Dataloggers
Temperature and Humidity Dataloggers
You can monitor temperature and humidity values efficiently and conveniently for long time periods by using the Datalogger.
The readings are saved in the logger and simply read out by your PC with USB interface.
Memory for 16000 (171) readings
Temperature datalogger (170)
Freely selectable measurement cycle from 2sec. to 24h
Battery life: more than 3 years
Display all status information through two LEDs
Download collected data through USB interface
Alarm display if user-defined maximum/minimum values exceed
Analysis software used to view graph for logging data
Standard ST-172 Temperature & Humidity Meter
ST172 is used to monitor temperature and humidity values efficiently and conveniently for long periods of time by using the data logger functionality. The dataloggers are saved in the logger and simply read out by your PC with a USB interface. The LCD shows current readings, MAX, MIN, and signs of alarm
Standard ST-185 Light Datalogger
Standard ST-321S Humidity & Temperature Meters
Humidity & Temperature Meters
DT-321 is a compact probe-size digital Hygro-Thermometer, ideal for field use with high performance.
DT-321S is a fast response, high-accuracy digital Hygro-Thermometer with Dew point and wet bulb Temperature measurement.
DT-321F with 8 8-inch Gooseneck detector makes it easy to measure the hard-reached areas. It’s fast response, high accuracy digital Hygro-Thermometer with Dew point & Wet bulb Temperature measurement.
Standard ST-3348 True RMS 1000A AC Watt Clamp Meter.
Standard ST-3352 1500A AC/DC True RMS Clamp Meters with inrush Current Function
1500A AC/DC True RMS Clamp Meters with inrush Current Function
DT-3351 is a True RMS 1500A AC/DC Clamp Meter, and 3352 is a True RMS Power Meter, which provides much safer measurements with a double molded plastic housing design. True RMS AC/DC voltage and current measurements, 40,000 counts, and 0.1% basic DC accuracy within the reach of more customers. The large LCD with analog bar graph and backlit ensures that readings are easy to read under all circumstances. Measuring starting current for motors, lighting, etc. is easy with their rush current function. All inputs are protected by EN 610101-1 CATIV 600V/CATIII 1000V.
Standard ST-3383 Professional AC/DC Clamp Meter
Professional Heavy Duty AC, AC/DC True RMS Autoranging Clamp Meters with Dual Type K Inputs
The DT-3380 series clamp meters offer all the needed features for measurement, design for a perfect handhold, and tight place testing. A large backlit display (on most models) is easy to see and a handy Display Hold keeps measurements on the display. Dual-type K inputs for temperature measuring support more applications. Double molded plastic housing; True RMS measurement for ACV & ACA.
Standard ST-362 Compact AC,AC/DC Autoranging Clamp Meters
Compact AC,AC/DC Autoranging Clamp Meters
The 360 series clamp meters offer all needed features for measurement. It with small bodies and jaws design for perfectly handhold and tight place testing. A large backlit display (on most models) is easy to see and a handy Display Hold keeps measurements on the display. Measuring starting current for motors, lighting, etc. is easy with the inrush current function (366 only).
- Double molded plastic housing
- Inrush current function (366 only)
- Auto Power Off
Standard ST-363 Compact AC,AC/DC Autoranging Clamp Meters
Compact AC,AC/DC Autoranging Clamp Meters
The 360 series clamp meters offer all needed features for measurement. It with small bodies and jaws design for perfectly handhold and tight place testing. A large backlit display (on most models) is easy to see and a handy Display Hold keeps measurements on the display. Measuring starting current for motors, lighting, etc. is easy with the inrush current function (366 only).
- Double molded plastic housing
- Inrush current function (366 only)
- Auto Power Off
Standard ST-3852 Sound Level Meters
Standard ST-3898 Vibration Datalogger
Standard ST-5300B Earth Ground Resistance Testers
Earth Ground Resistance Testers
Electronic Digital Earth Resistance Tester is a direct replacement of the conventional hand generator type tester. It is designed for the measurement of the resistance of earthing used in the electrical equipment as well as for the measurement of ground resistivity. It can be used for measurements of the other low regular and liquid resistances. It can also be used for the measurement of voltage AC, voltage DC, and resistance.
This instrument has wide applications for testing earthing installation in power-based industries, telecommunication networks electrical traction systems, etc.